When using a casting machine for processing, there will definitely be some material residue on the casting die, even when the material casting machine stops working. So how to remove material residue on the casting die head? Let Sansi Technology tell you:
1. When the casting machine mold is in operation, the material passes through the flow channel of the mold head and forms a thin film for external output; Start the power device connected to the shaft, so that the two shafts rotate in the direction of pushing the film outward, and the rotation directions of the two shafts are opposite; The rotational speed of the two shafts is equal to the speed of the film being transported outward by the casting machine; The accumulated material of the mouth mold adhered to the surface of the shaft enters the discharge box with the rotation of the shaft and is scraped off by a scraper.
2. Start the hot compressed air generation device and the mouth mold accumulation collection device, where the air pipe in the hot compressed air generation device blows the mouth mold accumulation material scraped off by the scraper into the discharge box, and the mouth mold accumulation collection device sucks the mouth mold accumulation material from the discharge box into the mouth mold accumulation collection box.
If you want to remove material residue on the casting die head, you can try the above removal method, hoping it will be helpful to everyone.